RestoreAssist drafts compliant S500 / S520 / S540 / S700 reports from the data you've captured on the inspection. The model writes; you review and sign off.
Before you start
You need:
- An inspection in
IN_PROGRESSstatus - At least 4 photos with chain-of-custody hashes attached
- Moisture readings or affected-area measurements logged
- Scope line items added
Without these inputs the Generate report button is disabled — the model needs evidence to cite.
Generate the draft
Open the inspection's detail page and click Generate report in the top-right action bar.
A premium task router (lib/ai/model-router.ts) picks the model based on claim complexity. Average turnaround is 10–30 seconds. Bring-your-own-key (BYOK) reduces token cost by 60–80% — set your key in Settings → AI keys if you want to use your own.
What the draft contains
The generated report follows the IICRC structure for your claim type. For water it includes:
- Property & loss overview — address, date of loss, cause
- Category & class determination — per
S500:2025 §10and§11 - Affected materials inventory — with photo references
- Moisture mapping — readings table + interpretation
- Scope of work — line items mapped to drying / extraction / antimicrobial steps
- Standards cited —
S500:2025sections referenced inline
Review and edit
The draft is a starting point, not a finished document. Read every section. Common edits:
- Tighten loss-cause wording to match what the homeowner told you
- Re-classify category if the model under- or over-called it
- Add narrative on access constraints or hidden moisture
Save and sign off
Click Save draft to keep iterating, or Submit for sign-off when the report is ready. Once signed off, the report is immutable and the inspection moves to COMPLETED.